PixelCircles logoPixelCircles

Minecraft Spiral Staircase Generator

A Minecraft spiral staircase 9 blocks across and 20 levels tall, with 12 steps per turn, takes 75 stairs and 480 wall blocks. This spiral staircase generator plans round stairs level by level, with arrows that show which way every stair faces. Works for Java and Bedrock. Download a .litematic schematic and import it into Minecraft Java with Litematica — build over the hologram in survival or paste it in creative.

Height (levels)
12
Direction
Level 1 / 20 · Y=020
MaterialBlocks
Oak Planks (wall)480
Oak Stairs75
Spiral Staircase Ø9
Level
1 / 20 · Y=0
This level
29
Total blocks
555
Stacks of 64
8 stacks + 43
Width × depth × height
9 × 9 × 20
Placed
0 / 555

Click a block to mark it placed.

Readout coordinates: x points east and z south, counted from the centre block; on an even size, 0, 0 is the block just south-east of the centre.

Keys: ↑↓ size · ←→ level · 3 3D view · E tools

For the Litematica mod: put the file in .minecraft/schematics, press M in game, then Load Schematics. The file holds every level.

Comments

Row-by-row block counts for this level
RowBlocksColumns with a block
153–7
222, 8
321, 9
441, 7–9
551, 6–9
621, 9
721, 9
822, 8
953–7

How to use

  1. Set the size and options above the plan.
  2. Step through the levels, or open the 3D view.
  3. Download the .litematic, or print the plan.

This Minecraft spiral staircase generator plans a round staircase one level at a time. Set the diameter, the height, how many steps make a full turn and the direction, then step through the levels. Arrows show which way each stair faces, and the Litematica file has every stair turned the right way.

Minecraft spiral staircase 9 blocks wide and 20 layers high: a floor plan with the layer of every stair, then each of the 20 layers, 75 stairs and 480 wall blocks
3D view of a Minecraft spiral staircase 9 blocks wide and 20 layers high, with the front half of the wall cut away so the stairs inside show: 75 stairs and 480 wall blocks in the full build

How Minecraft spiral staircases work

A spiral staircase is a ring of stairs that climbs one block per step. Seen from above, the ring is cut into wedges like a pie. Each level gets the next wedge, one block higher than the last, so you walk around and up at the same time.

For the stairs to be walkable, each wedge has to touch the one below it along a side, not just a corner. The generator fills the whole wedge between the pillar and the wall on every level, so there is always a full step to walk onto.

A stair block climbs toward the way it faces. When you place a stair, it faces the way you are looking. So stand on the step below and look along the direction of the arrow when you place each one.

Why spiral stairs? They take little floor space: this Minecraft spiral staircase generator plans one for a stairwell 5 blocks across, wall included. That suits towers and lighthouses.

The three parts of a spiral staircase

  • The steps. Stair blocks, one wedge per level. At small sizes a wedge is one block; on wide stairs it is a row of blocks from the pillar to the wall.
  • The outer wall. A ring the size of the diameter on every level. It turns the stairs into a tower and stops you falling. In the plan and the file it uses the plank or stone that matches the stairs.
  • The centre pillar. A column in the middle, in logs or stone bricks. It is optional: without it you get an open stairwell you can look down.

Sizing guide

Steps per turn, stairs and wall blocks for Minecraft spiral staircases of common diameters
DiameterMost steps per turnStairs for 20 levels (12 per turn)Wall blocks for 20 levels
5723240
71334320
91975480
1124115560
1524230800
21244911,120
25247051,360

A 5-block stairwell only has a few free blocks inside the wall, so it cannot fit more than a handful of steps per turn. The tool uses the most it can and says so under the controls.

Steps per revolution

Steps per turn sets how steep the staircase is. With 8 steps, a full turn climbs 8 blocks and the wedges are wide. With 24 steps, a turn climbs 24 blocks and each step is a thin slice. Twelve is a comfortable middle.

You need two free blocks above each step to walk without bumping your head. The next step above the same spot is a full turn higher, so every setting here leaves plenty of room.

Block choices by build style

  • Medieval tower: cobblestone or stone brick stairs, stone wall, no pillar.
  • Cottage or treehouse: oak or spruce stairs with a log pillar.
  • Desert build: sandstone stairs and walls.
  • Nether fortress: nether brick stairs with a red nether brick pillar.

Common mistakes

  • Placing stairs facing the wrong way. Look along the arrow when you place each stair, or use Litematica's Easy Place mode.
  • Building the wall all at once. A tall finished wall makes the inside dark and hard to reach. Raise it a few levels ahead of the stairs.
  • Placing a stair upside down. Clicking the top half of a block face flips the stair. Aim at the lower half.
  • No light. Mobs spawn in dark stairwells. Put a torch or a lantern in the wall every few levels.

Spiral staircase sizes

Sizes from the Minecraft spiral staircase generator for 20 levels, outer wall on, 12 steps a turn. Click a row to open it. A stairwell 5 blocks across fits only 7 steps, so it climbs 7 levels a turn; wider ones climb 12.

Spiral staircase sizes for 20 levels
DiameterStairsWall blocksPillar blocks (if on)Levels per turnTurns in 20 levels
5232402072.9
73432020121.7
97548020121.7
1111556020121.7
1316972020121.7

Tower, open and pillar spiral stairs

Two switches, Outer wall and Centre pillar, give three styles in the Minecraft spiral staircase generator. Each link sets them.

  • Tower: wall on, pillar off, the default. A closed circular staircase for a spiral tower or lighthouse.
  • Open: wall off. The stairs stand free, good in the middle of a hall.
  • Pillar: wall and centre pillar on. The steps wind round a column of logs or stone bricks.

Frequently asked questions

How do you build a spiral staircase in Minecraft?

Build the outer wall a few levels at a time, then place the stairs level by level from the bottom. Slide the level slider (or press → ) and copy the highlighted stairs; the arrows show which way each stair faces.

What is the best size for a Minecraft spiral staircase?

Nine blocks across is the classic tower staircase. With a wall and 12 steps per turn, 20 levels take 75 stairs and 480 wall blocks.

Clockwise or anticlockwise: does it matter?

Not for walking. Many castle stairs turn clockwise going up, and a popular story says that helped right-handed defenders. Pick whichever fits the door you enter from.

How many stair blocks do I need per turn?

One wedge of stairs per level, and one level per step, so a turn uses as many levels as you set steps per turn. The Stats panel adds up the exact number of stairs.

Do I need the wall or the pillar?

Neither is needed to walk the stairs. The wall keeps you from falling off and turns the staircase into a tower. The pillar fills the gap in the middle; leave it out for an open stairwell.

How do I use the .litematic download?

Install Litematica, put the file in .minecraft/schematics, press M in game and load it. Each stair in the file already faces the right way, so with Easy Place the stairs go down correctly.

Can I import this build straight into Minecraft?

Yes, on Java Edition with the Litematica mod. Install Fabric and MaLiLib, put the .litematic file in .minecraft/schematics, then press M → Load Schematics in Minecraft. In survival, the build appears as a translucent hologram and you place blocks over it; Easy Place can place one block at a time from the projection. In creative, Litematica can paste the whole build into your world; on a server you need administrator (op) permission. Bedrock Edition cannot use .litematic files, so follow the grid and layer plans instead.

How many blocks does a spiral staircase climb per turn?

As many as it has steps per turn, since every step is one level higher. With the default 12 steps, a turn climbs 12 blocks.

What is the difference between clockwise and anticlockwise spiral stairs?

Only the way they turn. The block count is the same: 9 blocks across and 20 levels takes 75 stairs plus 480 wall blocks either way.